▶️ Project Sledgehammer
Ask any Pentium Https://bannerven.com/slot/ruby-slots-no-deposit.html user if they would've shelled out the cash for their system a few years back knowing that the Socket-8 Pentium Pro interface would pretty much be a dead end at 200MHz by the end of 1997.
Chances are they would've stuck to a plain old Pentium system and saved the extra cash for a rainy day.
The same can't and won't be said about those users that bought Pentium Pro systems because they truly dual slot 2 motherboard them, meaning, those that ran the quad processor demons as servers and high end workstations.
For them, the processor was worth the cost, and it was what they needed to get the job done.
That last line is key to the success of Intel's Xeon processor, it article source the job done.
For a desktop user, and for a gamer, dual slot 2 motherboard purpose of having the power of a single or even a dual Pentium III Xeon 500 under the hood of their computer is the same reason car buffs brag about their engines being able to produce more horsepower than most five year olds can count up to.
With the need there, why is it that Xeon motherboards receive so little attention on-line?
Is it because they cost an arm and a leg to buy?
Or is it because they don't make Quake 3 run any faster so therefore they "don't really matter?
As AnandTech was in the position, just recently, to purchase a dual processor Xeon board, it's time for AnandTech to take a look at what the Slot-2 Dual slot 2 motherboard motherboard market has to offer.
Long since the release of the Xeon processor, Epox, dual slot 2 motherboard company relatively new to the multiprocessor motherboard industry, has finally come out with a relatively cost effective solution for Xeon owners.
Modeled after the well designed dual Slot-1 BXB-S, dual slot 2 motherboard GXB-M offers everything Epox's first dual processor solution did, with dual slot 2 motherboard cost effective twist.
However how does that stack up in the Slot-2 motherboard market?
Because of that, the GXB-M, as well as all other Xeon boards are only available in an Extended ATX form factor.
The length of the board does allow for all 5 PCI slots to accept full length PCI cards, however if a PCI card should extend a centimeter or about half an inch longer than most dual slot 2 motherboard full length cards, 3 of the 5 slots will suddenly become uninhabitable by that particular card.
Signs of Epox's eye for design are present in the GXB-M as they were in the BXB-M, such as the positioning of the two IDE connectors such that they do not interfere with the installation of any full length PCI cards.
Of the two ISA slots, only the first is capable of accepting a full length card, which isn't too big of an issue considering that the longest of ISA cards are usually out of date controllers or old SB16 cards.
Slot-2 Terminator Card The board is outfitted with 4 DIMM slots, the maximum supported by the 440GX chipset.
The memory banks lay parallel to the 443GX controller chip, that allows for the 2GB memory capacity of the motherboard, a 1GB improvement over the BX chipset.
On the opposite side of the 443GX dual slot 2 motherboard are the dual SC330 interface slots which themselves are separated by two rows of Sanyo capacitors.
The distance between the two connectors is a little over an inch 2.
The retail Xeon heatsink as well as most 3rd party low-profile fans should do just fine, however link aware of the space constraints with the GXB-M those constraints are present with most Xeon boards.
Interestingly enough, it seems as if Slot-2 boards require the use of a CPU terminator card if only a single processor is being used in the motherboard.
The same used to be a "requirement" for dual processor Slot-1 motherboards until it was dropped out of consideration for keeping costs down.
Wonder how long this "requirement" will be around.
Needless to say, Epox does supply you with a SC330 CPU terminator card in the event that you only use a single processor on the board.
Although power supply failures aren't the most common failures, the longer you run your system, the closer your power supplies get to their rated mean time between failures.
Testing Dual Slot 1 motherboard - Perhaps for the upcoming Retro Gaming PC Build ?
Tyan® Announces Dual Slot 2 Motherboard. New model offers workstation-class performance with two Intel® Pentium® II Xeon processors and numerous other.
Yes you the talented person
Now that's something like it!
I apologise, but, in my opinion, you are not right. I am assured. I can defend the position. Write to me in PM, we will discuss.
Bravo, very good idea
I apologise, but, in my opinion, you commit an error.
How will order to understand?
I join. It was and with me.
What magnificent words
What entertaining answer
I consider, that you commit an error. Let's discuss. Write to me in PM.
Matchless topic, it is pleasant to me))))
What necessary words... super, magnificent idea
Absolutely with you it agree. In it something is also idea good, I support.
You are not right. I am assured. Write to me in PM.
I can recommend to visit to you a site on which there is a lot of information on this question.
This excellent idea is necessary just by the way
I think, that you are not right. I am assured. Let's discuss it. Write to me in PM.
It is remarkable, it is very valuable information
I am very grateful to you. Many thanks.
And other variant is?
I apologise, but, in my opinion, you are not right. I can prove it. Write to me in PM, we will communicate.
It is usual reserve
Absolutely with you it agree. I like your idea. I suggest to take out for the general discussion.
Thanks for an explanation. I did not know it.